WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium
  • WhirlPole Kit for Pole Hive Podium

WhirlPole Kit for Pole Hive Podium

€280.33 Tax excluded
PREPARATION TIMES: 5 WORKING DAYS
Whirlpole Kit for

Kit to turn the pole of your Podium into WhirlPole: inclined and rotating pole, using your Pole Pole Hive as support base, and Flying Pole.

The kit includes: a double safety rope, a special binding to be inserted in the upper part of the pole, a central joint for the passage of the safety ropes, a ball point to be positioned at the base of the pole and a whirlpole adapter to be positioned on the central point of the podium

To be able to screw the special binding to the pole, check that the upper section of the pole has holes on both sides.

The kit is compatible with: All Pole Hive Podiums with divisible pole. The podium and the pole are NOT included with the purchase of this product.

Must have accessories

Accessories

Hand Loop Strap For Aerial Acrobatics

Hand Loop Strap For Aerial Acrobatics

€24.51

Compatible Accessories

Albatros - anchor plate for ceiling with built-in swivel

Albatros - anchor plate for ceiling with built-in swivel

€113.11

Accessories for Complementary Disciplines

Carrying Bag for the pole of Pole Hive Podium

Carrying Bag for the pole of Pole Hive Podium

€55.74

Turn the pole of your Pole Hive Podium into an inclined/rotating and flying pole

The Whirlpole kit for podium Pole Hive is compatible with Pole Hive Podiums with divisible pole. It allows to use the pole of the Podium as a Whirlpole: inclined/roating and flying.

In order to use the pole for podium as a Flying Pole we recommend UltraGrip2 coating that thanks to its special rubber gives a better grip for hands and legs and it's then safer.

The kit includes

  • A double safety rope - 450 kg of breaking load for each string.
  • A central linchpin (through which the safety rope passes)
  • A special binding to be inserted in the upper part of the pole
  • Whirlpole ball point (a ball for the base of the pole)
  • Whirlpole adapter for podium (graft to be inserted in the central fulcrum of the podium) to practice with the pole inclined at 45°.

Kit installation

The assembly of the pole podium Whirlpole happens with a rope that has to be attached at the ceiling with specific and safe supports.

The ball has to be inserted in the base of the pole and then into the graft of the podium that allows the rotation.

The necessary space to use Whirlpole can vary depending on the inclination of the pole: it's good to consider a minimum radius same as 3/4 of the height of the pole.

The passage from inclined pole to flying pole is easy: you have to shorten the rope until the pole is suspended in the air.

The Whirlpole TheBase UltraGrip for pole dance is compatible with the Albatros component: a steel plate that is designed to be easily fixed to the ceiling with the use of wall plugs and screws. This component permits to safe space, as well as the cost of a traditional swivel and you can fix the accessories directly to the safety ring provided.

ATTENTION: the poles GeckoGrip 40 mm and UltraGrip2 45 mm can be used by only one person.

ATTENTION: the podium and the pole are NOT included with the purchase of this product.

20.2080.G45.001

Data sheet

Compatible with
Pole Hive Podium with divisible pole

Comments

It might also interest you