Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole
  • Whirlpole Kit for Flying Pole

Whirlpole Kit for Flying Pole

€172.13 Tax excluded
SHIPPING TIME: 5 WORKING DAYS
Pole Diameter
 Calculate Shipping Cost
Shipping:
Free
to Italy via Ritiro in Negozio - Via Padre Albisetti 12, Terno d'Isola (BG)
Estimated delivery: No estimated delivery specified

Kit to turn your flying pole into Whirlpole: inclined and rotating pole just leaning your Flying Pole to the base TheBase.

The kit includes: a ball point to be attached under the flying pole, the base that allows to practice with the pole inclined at 45°, a special binding to be inserted in the upper part of the pole.
The kit is compatible with: Flying Pole Ultragrip2 and Portable Flying Pole Ultragrip2.

To be able to screw the special binding to the pole, check that the upper section of the pole has holes on both sides.

Indicate the diameter of your flying pole.

Must have accessories

Accessories

Hand Loop Strap For Aerial Acrobatics

Hand Loop Strap For Aerial Acrobatics

€24.51
Albatros

Albatros

€113.11
Carabiner

Carabiner

€5.66

The Whirlpole kit for Flying Pole allows to use the flying pole as a Whirlpole, that is as a sloping and spinning pole.

Artist: Brennan Figari

The Whirlpole kit for Flying Pole is compatible with the following models of flying and suspended pole

  • Flying Pole Ultragrip2 45 mm and 51 mm of diameter
  • Portable Flying Pole Ultragrip2 45 mm of diemater

Remeber: the UltraGrip2 pole with 45 mm of diameter can be used by only one person.

The kit consists of:

  • WHIRLPOLE BALL POINT - a ball to be attached under the flying pole
  • THEBASE - the hexagonal base that allows to practice with the pole inclined at 45°
  • A special binding to be inserted in the upper part of the pole

Technical features of the Hexagonal Base

  • Material: anticorrosion steel
  • Thickness: 5mm
  • Weight: 5 kg
  • Hexagonal: 500mm diagonal line

The passage from flying pole to spinning pole happens by stretching the rope until the pole with the ball leans on the specific self-blocking base TheBase.

The base on the ground The Base consists of a hexagonal anticorrosion steel plate 5mm thick with a central joint made of polymer anti-friction that allows the rotation of the pole with an incline of around 45°.

On the part in contact with the ground the base has got a rubber with high friction that prevents its slipping during the practice.

NOTE: it's very important that the base in contact with the ground is clean because dust or other remains could reduce the grip and cause a side glide.

The necessary space to use Whirlpole can vary depending on the inclination of the pole: it's good to consider a minimum radius same as 3/4 of the height of the pole.

ATTENTION: the Flying Pole is not included with the purchase of this product

20.4010.45.001

Comments

It might also interest you