Inclined, rotating and flying pole.
UltraGrip (rubber) coating available in two colour options: matte grey or matte black in 45 mm or 51 mm of diameter (the black color, due to its composition, could release color on the clothes).
To use the WhirlPole as a FlyingPole, the ceiling must be at least 4 meters high.
Please be aware that the 45-mm pole is designed to be used by one person at a time only.
The Whirlpole is equipped with a double security rope, 450 kg of breaking load for each rope, and a sphere installed at one of the pole’s ends, which, if inserted into a special platform called TheBase, allows performing various choreographic evolutions on a pole inclined at approx. 45°.
the UltraGrip pole for pole dance boasts a considerably superior grip than any other dance pole can offer. Invincible when you use stage costumes or pole dance apparel, the UltraGrip pole for pole dance guarantees an extraordinary grip in any conditions. In fact, this exceptional grip ensures supreme adhesion even to fabrics. The UltraGrip special manufacturing process guarantees the coating’s durability and reliability incomparable to other similar dance pole finishes.
The UltraGrip coating is available in two colour options: matte grey and black in 45 mm or 51 mm of diameter.(the black color, due to its composition, could release color on the clothes).
LENGTH OF THE POLE:
ATTENTION: Please be aware that the 45-mm UltraGrip pole is designed to be used by one person at a time only.
The Whirlpole TheBase GeckoGrip pole for pole dance can be split in two parts. You can easily remove the upper part and install the pole in places with different ceiling heights. This feature allows also a comfortable and easy transportation, even in your car, thanks to the compatible pole bag.
The Ultragrip2 coating is cleaned with the MEC (Methyl Ethyl Ketone).
The installation is quick and easy. It is enough to fix the pole rope to the ceiling using special supports and insert the pole’s end sphere into a special platform called TheBase.
The space required will vary depending on the inclination. Please take into consideration that the minimum radius should correspond to ¾ of the pole’s height.
The floor platform called TheBase is a 5-mm thick stainless steel plate. Its central junction is designed to fix the Whirlpole’s end sphere and keep the pole inclined at approx. 45°.
The platform’s surface, which remains in contact with the floor, is covered with a high-friction rubber finish that ensures its stability and prevents slipping when in use.
ATTENTION: Make sure that the platform’s surface in contact with the floor is free of dirt and dust, which may reduce the grip and cause slipping.
The Whirlpole TheBase UltraGrip for pole dance is compatible with the Albatros component: a steel plate that is designed to be easily fixed to the ceiling with the use of wall plugs and screws. This component permits to safe space, as well as the cost of a traditional swivel and you can fix the accessories directly to the safety ring provided.
|Pole Diameter||45 mm or 51 mm|
|Mounting||Fissaggio della corda di sostegno al soffitto e palo inserito nell’apposita base.|
|Use||Spinning or Flying|
|Pole Covering||matte grey or matte black with a special UltraGrip2™ coating|
|Type||Rotante o Volante|
|Maximum Length||280 cm or 300 cm|
No customer reviews for the moment.