WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX
  • WhirlPole TheBase INOX

WhirlPole TheBase INOX

€602.46
SHIPPING TIME: 5 WORKING DAYS
Pole Covering
Pole Diameter
 Calculate Shipping Cost
Shipping:
Free
to Italy via Ritiro in Negozio - Via Padre Albisetti 12, Terno d'Isola (BG)
Estimated delivery: No estimated delivery specified

Inclined, rotating and flying pole.
100% certified stainless steel pole in 45 mm of diameter.
Pole length: 300 cm (2 pieces of 150cm).
The assembly consists in fixing the pole to the ceiling with a support rope and inserting the pole into the special base included.

To use the WhirlPole as a FlyingPole, the ceiling must be at least 4 meters high.

Must have accessories

Accessories

Hand Loop Strap For Aerial Acrobatics

Hand Loop Strap For Aerial Acrobatics

€24.51
Carabiner

Carabiner

€5.66
Albatros

Albatros

€113.11
ThePole-Cleaner

ThePole-Cleaner

€9.75

Compatible Accessories

Carrying Bag for the pole of Pole Hive Podium

Carrying Bag for the pole of Pole Hive Podium

€53.28

WhirlPole: the evolution of the flying pole

The WhirlPole is a inclined and rotating pole that can also be used as a flying pole.

*Depending on the height of the ceiling will be calculated the length of the pole WhirlPole. To use the WhirlPole as a FlyingPole (flying pole) the ceiling must be at least 4 meters high.

The Whirlpole is equipped with a double security rope, 450 kg of breaking load for each rope, and a sphere installed at one of the pole’s ends, which, if inserted into a special platform called TheBase, allows performing various choreographic evolutions on a pole inclined at approx. 45°.

Artist: Brennan Figari

Palo 100% stainless steel

.The Inox WhirlPole offer a level of grip which lies mid-way between standard chromed poles and poles with the GeckoGrip finish.
They are made entirely in certified stainless steel which, unlike classic chromed poles, does not wear with use, and there is no risk of the material flaking, leading to the risk of cuts.

INOX poles, already successfully used in international competitions, are hand polished to a mirror finish, attractive to look at, and safe to use. The central joint on INOX pole dancing poles are made in aeronautical aluminium.

INOX stainless steel poles can be cleaned with WATER and AMMONIA.

As is the case with chrome poles, and unlike the GeckoGrip poles, stainless steel poles contain nickel, and it is therefore important to ensure individual user compatibility. If you are allergic to nickel, choose a pole with the GeckoGrip coating.

If you wish to use your Whirlpole TheBase GeckoGrip as a flying pole as well, especially if at high altitudes, we recommend you to use the WhirlPole whit UltraGrip2 coating, which will guarantee a better grip and a greater security thanks to its special rubber finish. To use the WhirlPole as a FlyingPole, the ceiling must be at least 4 meters high.

The Whirlpole TheBase INOX pole for pole dance can be split in two parts of 150 cm. You can easily remove the upper part and install the pole in places with different ceiling heights. This feature allows also a comfortable and easy transportation, even in your car, thanks to the compatible pole bag.

WhirlPole installation

The installation is quick and easy. It is enough to fix the pole rope to the ceiling using special supports and insert the pole’s end sphere into a special platform called TheBase.

The space required will vary depending on the inclination. Please take into consideration that the minimum radius should correspond to ¾ of the pole’s height.

The floor platform called TheBase is a 5-mm thick stainless steel plate. Its central junction is designed to fix the Whirlpole’s end sphere and keep the pole inclined at approx. 45°.

The platform’s surface, which remains in contact with the floor, is covered with a high-friction rubber finish that ensures its stability and prevents slipping when in use.

ATTENTION: Make sure that the platform’s surface in contact with the floor is free of dirt and dust, which may reduce the grip and cause slipping.

The Whirlpole is compatible with the Albatros component: a steel plate that is designed to be easily fixed to the ceiling with the use of wall plugs and screws. This component permits to safe space, as well as the cost of a traditional swivel and you can fix the accessories directly to the safety ring provided.

50.5010.XX45.001

Data sheet

Pole Diameter
45 mm
Mounting
Fixing of the support rope to the ceiling and pole inserted in the appropriate base.
Use
Spinning or Flying
Pole Covering
100% INOX
Composition
2 pieces
Maximum Length
280 cm

Compare with Similar Products

WhirlPole TheBase INOX

WhirlPole TheBase INOX

star_border star_border star_border star_border star_border
0 Review(s) 

This product

Whirlpole TheBase GeckoGrip

Whirlpole TheBase GeckoGrip

star_border star_border star_border star_border star_border
0 Review(s) 
WhirlPole TheBase UltraGrip

WhirlPole TheBase UltraGrip

star_border star_border star_border star_border star_border
0 Review(s) 
Price
Price
€602.46
Price
€483.61
Price
€700.82
Pole Diameter
Pole Diameter 45 mm
Pole Diameter 45 mm, 40 mm
Pole Diameter 45 mm, 51 mm
Mounting
Mounting Fixing of the support rope to the ceiling and pole inserted in the appropriate base.
Mounting Fixing of the support rope to the ceiling and pole inserted in the appropriate base.
Mounting Fixing of the support rope to the ceiling and pole inserted in the appropriate base.
Use
Use Spinning or Flying
Use Spinning or Flying
Use Spinning or Flying
Pole Covering
Pole Covering 100% INOX
Pole Covering GeckoGrip bianco lucido, GeckoGrip nero lucido
Pole Covering UltraGrip nero opaco, UltraGrip grigio opaco

Comments

It might also interest you