Superior GeckoGrip Pole Spare Part for OnlyOne Pole
  • Superior GeckoGrip Pole Spare Part for OnlyOne Pole
  • Superior GeckoGrip Pole Spare Part for OnlyOne Pole
  • Superior GeckoGrip Pole Spare Part for OnlyOne Pole

Superior GeckoGrip Pole Spare Part for OnlyOne Pole

€68.03 Tax excluded
SHIPPING TIME: 10 WORKING DAYS
Pole Covering
Pole Diameter
Pole's steel thickness (EXPLANATION BELOW)
Lower spare part length
Pole&Silk Pivot (EXPLANATION BELOW)

Piece of pole to adapt your OnlyOne pole with GeckoGrip coating to new heights.
Coating: Glossy white or glossy black GeckoGrip
Diameters: 40 mm or 45 mm
Steel thickness of 45mm pole: 3mm or 4mm (read below to understand the steel thickness of your pole). ALL 40MM POLES HAVE A THICKNESS OF 3MM.

Maximum ceiling height for Poles:
with a diameter of 45 mm and a lower section of 200 cm in length: 420 cm
with a diameter of 45 mm and a lower section of 140 cm in length: 368 cm
with a diameter of 45 mm and a lower section of 150 cm in length: 378 cm
with a diameter of 40 mm and a lower section of 200 cm, 150 cm or 140 cm in length: 320 cm

Poles with a 200cm lower section, cannot be adapted to ceilings lower than 240cm.

For pressure set up we recommend the installation of the Safety Plate; choose it according to the diameter of the upper plate of your pole (15 cm or 11 cm).

Read the detailed information below.

Must have accessories

Accessories

Safety Plate

Safety Plate

€21.31
Polipole - Shake and Grip - liquid grip

Polipole - Shake and Grip - liquid grip

€12.21
ThePole-Cleaner

ThePole-Cleaner

€9.75

Compatible Accessories

Center Pad

Center Pad

€5.74

The replacement upper section for the OnlyOne GeckoGrip pole allows you to have different lengths for your freestanding pole according to your needs by simply changing the upper section.

The replacement part is compatible with all the OnlyOne 2-section poles, and this characteristic means they can easily be adapted to new different-height venues by simply changing the upper section.

To purchase the upper section of your pole, simply indicate the following characteristics:

  • Diameter of your pole

40 mm or 45 mm

  • colour of your pole

White or black

  • IF YOU HAVE A 45 MM POLE, INDICATE WHETHER IT HAS OR DOES NOT HAVE THE POLE&SILK pivot

See photo below to understand what the Pole&Silk pivot is, this information is important to cut the pole to the correct size

  • IF YOU HAVE A 45 MM POLE, INDICATE the thickness of the steel of your pole

The tube can have a thickness of 3 mm or 4 mm (see written explanation below)

  • Length of the lower section of your pole

The lower section can be 140 cm, 150 cm or 200 cm long depending on the model, if you have doubts you have only to measure the lower tube without the base.

  • Ceiling height where the pole will be installed

The pole is designed to adapt to the room with a tolerance of -1/+4 cm compared to the indicated height. Make sure you have taken the measurement at the point where it will be positioned. Depending on the indicated ceiling height, the upper replacement will be produced to allow the pole to be installed in the new height.

Pole WITH or WITHOUT Pole&Silk pivot?

Only 45 mm poles are equipped of the Pole&Silk pivot. This predisposition was not present on the first models. To check if your 45 mm pole is a model with this predisposition, you have to look at the upper plate, if the plate has a pivot with a through hole, then your pole HAS the Pole&Silk pivot, the image below helps to understand better .

All 45 mm Hydro model poles, recognizable thanks to the black plates, HAVE the Pole&Silk pivot.

The 40mm poles DO NOT have the Pole&Silk pivot.

Pole steel thickness: 3 mm or 4 mm?

To check whether your pole has 3 mm or 4 mm thick steel, you need to look at the internal joint that joins the pole pieces: if the joint has small holes similar to those visible in the photo below, then it has a thickness of 4 mm.

All 40mm poles are made of 3mm thick steel.

Please remember:

  • OnlyOne poles with a diameter of 45 mm and lower section of 200 cm in length can reach a maximum height of 420 cm.
  • OnlyOne poles with a diameter of 45 mm and lower section of 140 cm in length can reach a maximum height of 368 cm.
  • OnlyOne poles with a diameter of 45 mm and lower section of 150 cm in length can reach a maximum height of 378 cm.
  • OnlyOne poles with a diameter of 40 mm and lower section of 200 cm or 140 cm in length can reach a maximum height of 320 cm.

The new upper pole will replace the old one, watch the video.

Video Tutorial: how to change the upper section of the OnlyOne pole

For poles purchased before 2016, contact the company at: info@thepole.it before proceeding with the order, attaching a photograph of the upper part of the pole without the plate.

16060101-VERB

Data sheet

Pole type
Superior Pole Spare Part for OnlyOne™ Pole
Pole Covering
Bright withe GeckoGrip, Shiny Black GeckoGrip
Pole Diameter
45 mm, 40 mm
Compatible with
All poles from the OnlyOne series
Steel thickness of 45mm pole
3 mm, 4 mm

Comments

Grade
star star star star star
08/13/2023
star Verified Purchaser

Ricambio gecko grip

Ottimo prodotto, arrivato molto velocemente

Grade
star star star star star
03/15/2023

Ottimo

Tutto perfetto

Grade
star star star star star
10/21/2022
star Verified Purchaser

ottimi

conoscevo già i pali the pole perchè li uso in palestra e sono felicissima della mia scelta. oltre a prodotti di ottima qualità hanno anche un "servizio clienti" fantastico sia prima che durante che dopo l'acquisto

Grade
star star star star star
06/14/2022
star Verified Purchaser

Top

Precisione, puntualità nelle consegne e nelle risposte, massima professionalità, praticamente il top! Pali belli, solidi e affidabili!
Un'azienda eccezionale!

It might also interest you