OnlyOne QuickSpin LOW 45 Inox Hydro Pole

The OnlyOne QuickSpin LOW 45 Inox Hydro pole dancing pole has been designed and manufactured to be: easy to fit, safe to use, long-lasting and also attractive to look at.

Due to its technical characteristics, the stainless steel pole is available with a 45 mm diameter only.

The OnlyOne QuickSpin LOW 45 Inox Hydro pole is a professional pole which is suitable for all of those who love Pole Dance and practice it at all levels, and is ideal for equipping gyms, halls and venues.

Pressure or screw installation, as needed

The installation of OnlyOne QuickSpin LOW 45 Inox Hydro Pole can be done with screws or with very simple pressure system.

Please note that the pressure dance poles create the pressure of approx. 350 kg. Therefore, please make sure that your contact surfaces can support such force before you place your order. Pressure poles are not compatible with false ceilings. In this case we recommend our Pole Hive Podiums

It is possible to install the Safety Plate and Center Pad accessories which both increase the safety of the pole and make it quick to install.

The OnlyOne QuickSpin LOW 45 Inox Hydro Pole is supplied with a natural rubber called PAD on the ceiling and floor contact points. This special rubber protects even the most delicate surfaces such as parquet, it provides grip between the pole and the floor and ceiling, and thanks to its natural colour, does not stain.

Tailor made pole

The OnlyOne QuickSpin LOW 45 Inox Hydro Pole, 45 mm of diameter pole for pole dance, is cut to size and and it is suitable for ceilings of up to 240 cm in height, it is composed of two pole pieces with only one joint: this feature presents many structural benefits and reduces overall set-up time. As you place your order, remember to specify the height of the ceiling at the point where the pole will be used.

The pole is divided in two pieces: The lower segment part is 150 cm long, the superior part is tailor made and it can be replaced with another segment of different length to adapt the pole to new locations, click here: Replacement Upper Section for INOX freestanding poles

In the future, it will be possible to adapt this pole to ceilings of up to 368 cm in height.

The pole is designed to adapt to premises with an allowance of -1/+4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.

100% STAINLESS STEEL POLE

The OnlyOne QuickSpin LOW 45 Inox Hydro pole offers a level of grip which lies mid-way between standard chromed poles and poles with the GeckoGrip finish. They are made entirely in certified stainless steel which, unlike classic chromed poles, does not wear with use, and there is no risk of the material flaking, leading to the risk of cuts. OnlyOne Quickspin2 SSH 45 INOX poles, already successfully used in international competitions, are hand polished to a mirror finish, attractive to look at, and safe to use. The plates and the central joint on INOX pole dancing poles are made in aeronautical aluminium.

As is the case with chrome poles, and unlike the GeckoGrip poles, stainless steel poles contain nickel, and it is therefore important to ensure individual user compatibility. If you are allergic to nickel, choose a pole with the GeckoGrip coating.

INOX stainless steel poles can be cleaned with WATER and AMMONIA.

QuickSpin Torx system

Fitted with the brand-new QuickSpin TORX system: This is the most rapid fitting system in the world. A locking/unlocking system which allows for switching the pole from static to spin and vice-versa with a simple gesture, in one click, without the use of keys or other equipment.

QuickSpin Torx can resist forces of more than 25 times those of the previous model. The special connection profile allows the system to operate even with slight misalignments between bases. The functioning of the QuickSpin Torx does not require springs or gears, and is therefore guaranteed for thousands of cycles, even if used under pressure.

Suitable for Pole&Silk

The OnlyOne QuickSpin LOW 45 Inox Hydro Pole is prepared for the installation of the Pole&Silk Kit which allows the use of the Aerial Silk with the pole to invent new choreographies. Click here: Pole&Silk Kit for pressure pole

Can be installed even with beams

• Cement or wooden beams

The beam must be of at least 11 cm in width.

• IPE180 BEAMS

The pole is compatible with fittings for IPE 180 beams.

Maintenance

The OnlyOne QuickSpin LOW 45 Inox Hydro pole requires standard and simple installation: tightening of the screws, cleaning of the Pad (this must be clean in order to provide grip) and lubricating of the bearings when necessary (frequency depends on intensity of use).