TheCrab: Ipe180 Beam binding plate
  • TheCrab: Ipe180 Beam binding plate
  • TheCrab: Ipe180 Beam binding plate
  • TheCrab: Ipe180 Beam binding plate
  • TheCrab: Ipe180 Beam binding plate
  • TheCrab: Ipe180 Beam binding plate

TheCrab: Ipe180 Beam binding plate

€147.54
€118.03 Tax excluded
PREPARATION TIMES: 15 WORKING DAYS
 Calculate Shipping Cost
Shipping:
Free
to Italy via Ritiro in Negozio - Via Padre Albisetti 12, Terno d'Isola (BG)
Estimated delivery: No estimated delivery specified

Made of aeronautical aluminum, the IPE180 beam bindings plate allows to install the Pole Dance poles without any structural damage to the beam, in complete safety with the advantage of being able to easily move it to reconfigure the room. Only compatible with ThePole poles.

Must have accessories

Accessories

OnlyOne QuickSpin SSH 45 GeckoGrip Hydro Pole

OnlyOne QuickSpin SSH 45 GeckoGrip Hydro Pole

€392.62
OnlyOne QuickSpin PRO 45 GeckoGrip Hydro Pole

OnlyOne QuickSpin PRO 45 GeckoGrip Hydro Pole

€429.51
OnlyOne QuickSpin SSH 45 Inox Hydro Pole

OnlyOne QuickSpin SSH 45 Inox Hydro Pole

€536.07
OnlyOne QuickSpin PRO 45 Inox Hydro Pole

OnlyOne QuickSpin PRO 45 Inox Hydro Pole

€569.67

Compatible Accessories

Safety Plate

Safety Plate

€21.31

The connection for IPE180 beams, unlike others under-beam installation methods, does not affect the reliability of the beam to which it is attached.

it allows the installation of Pole Dance poles in complete safety, without any structural damage to the beams and with the great advantage of being able to easily move the poles to reconfigure the room.

The connection for IPE 180 Beams is compatible only with only OnlyOne poles by ThePole.

Thanks to this connection, the pole can be installed either by pressure or by screws, depending on the needs.

In case of pressure installation, for greater safety, it is possible to install the compatible Safety Plate accessory.

The intsallation of the beam plate takes place through a very simple tightening of the supplied screws and plates.

20.1080.001

Data sheet

Installation
The intsallation of the beam plate takes place through a very simple tightening of the supplied screws and plates
Compatible with
All poles from the OnlyOne series
Weight
1,7 kg
Diameter
15 cm
Slackrack height
4,2 cm

Comments

It might also interest you