Plate for square truss to install Pole Dance poles
  • Plate for square truss to install Pole Dance poles
  • Plate for square truss to install Pole Dance poles
  • Plate for square truss to install Pole Dance poles

Plate for square truss to install Pole Dance poles

€95.08 Tax excluded
SHIPPING TIME: 20 WORKING DAYS
 Calculate Shipping Cost
Shipping:
Free
to Italy via Ritiro in Negozio - Via Padre Albisetti 12, Terno d'Isola (BG)
Estimated delivery: No estimated delivery specified

The plate for square truss allows you to install pole dance poles under compatible square truss without any structural damage and in complete safety.

The plates for square truss are compatible with ThePole poles provided with holes on the plates because they must be able to be fixed with screws both to the square truss and to the floor without applying pressure, as the square truss does not support the pressure of 350 kg.

The screws to screw the pole plate to the plate for the square truss are included.

The plate for square truss is compatible with the Q30 and Q40 square truss

Must have accessories

Accessories

OnlyOne QuickSpin PRO 45 GeckoGrip Hydro Pole

OnlyOne QuickSpin PRO 45 GeckoGrip Hydro Pole

€429.51
OnlyOne QuickSpin PRO 45 Inox Hydro Pole

OnlyOne QuickSpin PRO 45 Inox Hydro Pole

€569.67

The box trusses connection allow Pole Dance poles to be installed in total safety, without causing any structural damage.

The poles must be screwed both to the binding and the floor, as the compatible beam cannot sustain the 300/350 kg of pressure applied by a pressure-mounted pole.

The box trusses connection are compatible with PRO model ThePole poles as these have the necessary screw holes on the plate.

The box trusses connection are compatible with Q30 and Q40 beams.

The box trusses connection is fitted by simply tightening the clamps which are supplied complete with screws and bindings.

20.1085.001

Data sheet

Installation
The intsallation of the beam plate takes place through a very simple tightening of the supplied screws and plates
Compatible with
PRO poles with screw holes on the plate
Weight
1,7 kg
Material
Steel
Dimensions
50 cm x 21 cm
Thickness
5 mm
Not compatible with
LOW poles, SSH poles and poles without screw holes on the plate

Comments

It might also interest you