Pole Dance pole, cut to measure for ceilings from 240 cm to 420 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, GeckoGrip coating available in white or black color, for pressure or screws installation. The pole is designed to adapt to premises with an allowance of -1/+ 4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.
Please read the information below
The OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole for pole dance is designed to be easy to install, safe to use and easy on the eyes.
The installation of OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole can be done with screws or with very simple pressure system. Please note that the pressure dance poles create the pressure of approx. 350 kg. Therefore, please make sure that your contact surfaces can support such force before you place your order. Pressure poles are not compatible with false ceilings. In this case we recommend our Pole Hive Podiums.
The OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole pole is supplied with a natural rubber called PAD on the ceiling and floor contact points. This special rubber protects even the most delicate surfaces such as parquet, it provides grip between the pole and the floor and ceiling, and thanks to its natural colour, does not stain. With particularly delicate surfaces, it is possible to purchase the thicker PAD8.
The OnlyOne QuickSpin2 PRO 45 mm of diameter pole for pole dance is cut to size and and it is suitable for ceilings of up to 420 cm in height, it is composed of two pole pieces with only one joint: this feature presents many structural benefits and reduces overall set-up time. As you place your order, remember to specify the height of the ceiling at the point where the pole will be used.
The pole is divided in two pieces: The lower segment part is 200 cm long, the superior part is tailor made and it can be replaced with another segment of different length to adapt the pole to new locations, click here: Replacement Upper Section for GeckoGrip freestanding poles
The pole is designed to adapt to premises with an allowance of -1/+4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.
The OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole is available in two colours: bright white and glossy-black with a special GeckoGrip lacquering. The manufacturing process consists in covering the specially prepared steel tubular elements with plastic molecules that grant this spinning pole extraordinary features.
The GeckoGrip pole can be cleaned with simple alcohol (preferably isopropyl).
Fitted with the brand-new QuickSpin2 TORX system: This is the most rapid fitting system in the world. A locking/unlocking system which allows for switching the pole from static to spin and vice-versa with a simple gesture, in one click, without the use of keys or other equipment. QuickSpin2 Torx can resist forces of more than 25 times those of the previous model. The special connection profile allows the system to operate even with slight misalignments between bases. The functioning of the QuickSpin2 Torx does not require springs or gears, and is therefore guaranteed for thousands of cycles, even if used under pressure.
The OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole can even be installed in special conditions, such as:
The OnlyOne QuickSpin2 PRO 45 GeckoGrip Pole pole requires standard and simple installation: tightening of the screws, cleaning of the Pad (this must be clean in order to provide grip) and lubricating of the bearings when necessary (frequency depends on intensity of use).
|Maximum Height||420 cm|
|Pole Diameter||45 mm|
|Mounting||Under pressure, even without drilling|
|Use||Static + Spinning|
|Pole Covering||Bright withe and Shiny Black GeckoGrip|
|Suitable to Pole&Silk kit||Yes|
No customer reviews for the moment.