Pole Dance pole, cut to measure for ceilings from 240 cm to 320 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, 100% certified stainless steel pole, pressure installation without drilling. The pole is designed to adapt to premises with an allowance of -1/+ 4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.
Please read the information below.
The OnlyOne Quickspin2 SSH 45 INOX Pole for pole dance, is designed to be easy to install, safe to use and easy on the eyes.
The OnlyOne Quickspin2 SSH 45 INOX Pole pole is installed without the need to drill either the floor or the ceiling, through the use of a very innovative pressure system. It has been designed to be installed and removed in complete safety, even various times a day.It is possible to install the Safety Plate and Center Pad accessories which both increase the safety of the pole and make it quick to install.
The OnlyOne Quickspin2 SSH 45 INOX Pole is supplied with a natural rubber called PAD on the ceiling and floor contact points. This special rubber protects even the most delicate surfaces such as parquet, it provides grip between the pole and the floor and ceiling, and thanks to its natural colour, does not stain. With particularly delicate surfaces, it is possible to purchase the thicker PAD8.
Please note that the pressure dance poles create the pressure of approx. 350 kg. Therefore, please make sure that your contact surfaces can support such force before you place your order.
Pressure poles are not compatible with false ceilings. In this case we recommend our Pole Hive Podiums
The OnlyOne Quickspin2 SSH 45 INOX Pole, 45 mm of diameter pole for pole dance, is cut to size and and it is suitable for ceilings of up to 320 cm in height, it is composed of two pole pieces with only one joint: this feature presents many structural benefits and reduces overall set-up time. As you place your order, remember to specify the height of the ceiling at the point where the pole will be used.
The pole is divided in two pieces: The lower segment part is 200 cm long, the superior part is tailor made and it can be replaced with another segment of different length to adapt the pole to new locations, click here: Replacement Upper Section for INOX freestanding poles
The pole is designed to adapt to premises with an allowance of -1/+4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.
The OnlyOne Quickspin2 SSH 45 INOX pole offers a level of grip which lies mid-way between standard chromed poles and poles with the GeckoGrip finish.
They are made entirely in certified stainless steel which, unlike classic chromed poles, does not wear with use, and there is no risk of the material flaking, leading to the risk of cuts.
OnlyOne Quickspin2 SSH 45 INOX poles, already successfully used in international competitions, are hand polished to a mirror finish, attractive to look at, and safe to use. The plates and the central joint on INOX pole dancing poles are made in aeronautical aluminium.
INOX stainless steel poles can be cleaned with WATER and AMMONIA.
As is the case with chrome poles, and unlike the GeckoGrip poles, stainless steel poles contain nickel, and it is therefore important to ensure individual user compatibility. If you are allergic to nickel, choose a pole with the GeckoGrip coating.
Fitted with the brand-new QuickSpin2 TORX system: This is the most rapid fitting system in the world. A locking/unlocking system which allows for switching the pole from static to spin and vice-versa with a simple gesture, in one click, without the use of keys or other equipment.
QuickSpin2 Torx can resist forces of more than 25 times those of the previous model. The special connection profile allows the system to operate even with slight misalignments between bases. The functioning of the QuickSpin2 Torx does not require springs or gears, and is therefore guaranteed for thousands of cycles, even if used under pressure.
The OnlyOne Quickspin2 SSH 45 INOX is prepared for the installation of the Pole&Silk Kit which allows the use of the Aerial Silk with the pole to invent new choreographies. Click here: Pole&Silk Kit for pressure pole
Pole&Silk demonstration video, click here: Pole&Silk with Podium
The OnlyOne Quickspin2 SSH 45 INOX pole can even be installed in special conditions, such as:
The OnlyOne Quickspin2 SSH 45 INOX pole requires standard and simple installation: tightening of the screws, cleaning of the Pad (this must be clean in order to provide grip) and lubricating of the bearings when necessary (frequency depends on intensity of use).
|Maximum Height||320 cm|
|Pole Diameter||45 mm|
|Mounting||Under pressure, without drilling|
|Use||Static + Spinning|
|Pole Covering||100% INOX|
|Suitable to Pole&Silk kit||Yes|
No customer reviews for the moment.