


Replacement upper section for the Pole Hive Podium or PoleCartridge pole to adapt the pole for new venues.
Coating: White or Black GeckoGrip
Diameters: 40 mm or 45 mm
Maximum length of replacement section: 150 cm
45mm pole thickness: 3mm or 4mm (If you are buying a new Podium and you want to add the spare part, the thickness of the pole is 3 mm, but if you already have a 45 mm pole, it is also important to check the thickness of your pole which can be 3 mm or 4 mm)
|
|
|
|
|
The replacement upper section for GeckoGrip freestanding poles allows you to have different lengths for your freestanding pole according to your needs by simply changing the upper section.
The replacement part is compatible with all the Pole Hive Podiums with 2-section poles, and thanks to this characteristic, they can easily be adapted to new different-height venues by simply changing the upper section.
To purchase the upper section of the Pole Hive free-standing pole, all you have to do is indicate:
40 mm or 45 mm
White or Black
140 cm or 150 cm
Podium Pole or PoleCartridge Pole
For outdoor use write: FOR OUTDOOR and the spare part with a maximum length of 150 cm will be sent. If you indicate the height of the ceiling, the upper replacement of the pole will be produced to allow the insertion of the complete pole in the Podium or in the Cartridge. We remind you that in order to be installed, the pole of the Podium will be, in total, 30 cm shorter than the height of the ceiling, the pole of the Cartridge will be, in total, 15 cm shorter than the height of the ceiling.
3mm or 4mm? If you are buying a new Podium and you want to add the spare part, the thickness of the pole is 3 mm, but if you already have a 45 mm pole, it is also important to check the thickness of your pole which can be 3 mm or 4 mm. You can recognize the 4 mm thick pole because the internal joint has a hole on the sides, see photo below to better understand.
The 40 mm pole is available only with 3 mm thickness.

Data sheet
Specific References