Pole Dance pole, cut to measure for ceilings from 320 cm to 420 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, 100% certified stainless steel pole, for pressure or screws installation. The pole is designed to adapt to premises with an allowance of -1/+ 4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed. Plate diameter 11 cm
For pressure installation we recommend adding the Safety Plate for the 11 cm plate.
  A rapid positioning device for pole dance poles that considerably reduces the risk of the pole falling in case of sudden decrease of friction. Available in paintable stainless steel or iron. Safety Plate diameter: 15cm or 11cm depending on the type of plate on your pole | ||
  Compact Pole Strap, certified and signed ThePole: for acrobatics on the pole with built-in swivel, 100% polyester. Use: pole dance fixing Certified Equipment It is not recommended to use on podium poles | ||
  SPECIAL OFFER: if you buy 10 bottles, you get 5 extra! ThePoleCleaner is a detergent with quaternary ammonium (an antibacterial agent used against COVID-19) suitable for sanitising and cleaning GeckoGrip-coated and INOX stainless steel poles without ruining the surface. HOW DOES IT WORK: spray generously onto a microfibre cloth and rub over the surface to be disinfected. No rinsing required. 500 ml - 16,907 fl oz | ||
  Polipole Shake and Grip has a double effect: getting rid of excessive moisture and providing an extra hold. 45 ml – 1,5 fl oz | Polipole Shake and Grip - liquid grip | |
  Carpet to put under the Pole or on the Podium. Ideal for figures on the floor, comfortable on the knees. Size: 137.5 cm x 153.5 cm. | Carpet for Pole Dance - ThePole Carpet |
  Kit to use the Aerial Silk with OnlyOne QuickSpin Pole. The Pole&Silk Kit includes: a stainless steel ring with safety system resistant to loosening , support to attach the Aerial Silk. Compatible with: OnlyOne QuickSpin GeckoGrip Pole 45 mm, OnlyOne INOX Pole 45 mm, OnlyOne UltraGrip 51 mm Pole. All poles must be equipped with configuration. Not compatible with: poles with 3D Ceiling Leveler The Aerial Silk is not included: Soft Aerial Silk is recommended for the Pole Silk discipline. If the pole is press-fitted, the use of the Safety Plate is recommended to increase safety. | Pole&Silk Kit for OnlyOne QuickSpin Pole |
The OnlyOne QuickSpin2 PRO 45 INOX Pole for pole dance, is designed to be easy to install, safe to use and easy on the eyes.
The installation of OnlyOne QuickSpin2 PRO 45 INOX Pole can be done with screws or with very simple pressure system. Please note that the pressure dance poles create the pressure of approx. 350 kg. Therefore, please make sure that your contact surfaces can support such force before you place your order. Pressure poles are not compatible with false ceilings. In this case we recommend our Pole Hive Podiums
It is possible to install the Safety Plate and Center Pad accessories which both increase the safety of the pole and make it quick to install.
The OnlyOne QuickSpin2 PRO 45 INOX Pole is supplied with a natural rubber called PAD on the ceiling and floor contact points. This special rubber protects even the most delicate surfaces such as parquet, it provides grip between the pole and the floor and ceiling, and thanks to its natural colour, does not stain.
The OnlyOne QuickSpin2 PRO 45 INOX Pole, 45 mm of diameter pole for pole dance, is cut to size and and it is suitable for ceilings of up to 420 cm in height, it is composed of two pole pieces with only one joint: this feature presents many structural benefits and reduces overall set-up time. As you place your order, remember to specify the height of the ceiling at the point where the pole will be used.
The pole is divided in two pieces: The lower segment part is 200 cm long, the superior part is tailor made and it can be replaced with another segment of different length to adapt the pole to new locations, click here: Replacement Upper Section for INOX freestanding poles
The pole is designed to adapt to premises with an allowance of -1/+4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed.
The OnlyOne QuickSpin2 PRO 45 INOX pole offers a level of grip which lies mid-way between standard chromed poles and poles with the GeckoGrip finish. They are made entirely in certified stainless steel which, unlike classic chromed poles, does not wear with use, and there is no risk of the material flaking, leading to the risk of cuts. OnlyOne QuickSpin2 PRO 45 INOX poles, already successfully used in international competitions, are hand polished to a mirror finish, attractive to look at, and safe to use. The plates and the central joint on INOX pole dancing poles are made in aeronautical aluminium.
INOX stainless steel poles can be cleaned with WATER and AMMONIA.
As is the case with chrome poles, and unlike the GeckoGrip poles, stainless steel poles contain nickel, and it is therefore important to ensure individual user compatibility. If you are allergic to nickel, choose a pole with the GeckoGrip coating.
Fitted with the brand-new QuickSpin2 TORX system: This is the most rapid fitting system in the world. A locking/unlocking system which allows for switching the pole from static to spin and vice-versa with a simple gesture, in one click, without the use of keys or other equipment.
QuickSpin2 Torx can resist forces of more than 25 times those of the previous model. The special connection profile allows the system to operate even with slight misalignments between bases. The functioning of the QuickSpin2 Torx does not require springs or gears, and is therefore guaranteed for thousands of cycles, even if used under pressure.
The OnlyOne QuickSpin2 PRO 45 INOX Pole is prepared for the installation of the Pole&Silk Kit which allows the use of the Aerial Silk with the pole to invent new choreographies. Click here: Pole&Silk Kit for pressure pole
during purchase, just add the 3D Ceiling Leveller for OnlyOne pressure poles.
The beam must be of at least 11 cm in width with the use of the Safety Plate, without the Safety Plate, the minimum width is 15 cm.
The pole is compatible with fittings for IPE 180 beams.
The OnlyOne QuickSpin2 PRO 45 INOX pole requires standard and simple installation: tightening of the screws, cleaning of the Pad (this must be clean in order to provide grip) and lubricating of the bearings when necessary (frequency depends on intensity of use).
Data sheet
OnlyOne QuickSpin PRO 45 INOX Hydro Pole star star star star star 3 Review(s) This product |  OnlyOne Quickspin SSH 45 INOX Pole star_border star_border star_border star_border star_border 0 Review(s) | ||
|---|---|---|---|
Price | Price €569.67 -10% €512.70 | Price €536.07 -10% €482.46 | Price €405.74 |
Maximum Height | Maximum Height 420 cm | Maximum Height 320 cm | Maximum Height 420 cm |
Pole Diameter | Pole Diameter 45 mm | Pole Diameter 45 mm | Pole Diameter 45 mm |
Mounting | Mounting Under pressure, even without drilling | Mounting Under pressure, without drilling | Mounting Under pressure, even without drilling |
Use | Use Static + Spinning | Use Static + Spinning | Use Static + Spinning |
Pole Covering | Pole Covering 100% INOX | Pole Covering 100% INOX | Pole Covering GeckoGrip bianco lucido, GeckoGrip nero lucido |
Pole type | Pole type Pressure pole | Pole type Pressure pole | Pole type Pressure pole |
QuickSpin2 System | QuickSpin2 System Yes | QuickSpin2 System Yes | QuickSpin2 System Yes |
Suitable to Pole&Silk kit | Suitable to Pole&Silk kit Yes | Suitable to Pole&Silk kit Yes | Suitable to Pole&Silk kit Yes |
Sempre TOP
Consegna prima dei tempi stabiliti e nuova base davvero meravigliosa!
Il migliore
Devo dire che sono molto soddisfatta del prodotto, bellissimo e facile da montare, grazie ThePole!
Super
5
Pole Dance pole, cut to measure for ceilings from 240 cm to 320 cm maximum, for static and spinning use with QuickSpin System, 40 mm of diameter, GeckoGrip coating available in white or black...
Pole Dance Pole with 3D slope head for sloped ceilings or beams with a slope of up to 30 degrees. Cut to size pole.Maximum length of the pole: 420cm for 45mm of diameter, 320cm for 40mm of...
Pole Dance pole, cut to measure up to 240 cm, for static and spinning use with QuickSpin System, 45 mm of diameter, 100% certified stainless steel pole, for pressure or screws installation. The...
Pole Dance pole, cut to measure for ceilings from 240 cm to 320 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, GeckoGrip coating available in white or black...
Pole Dance pole, cut to measure for ceilings from 240 cm to 320 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, 100% certified stainless steel pole, for pressure...
Pole Dance pole, tailor made up to 298 cm* for static and spinning use with QuickSpin2 System, 45 mm or 51 mm of diameter, with rubber coating UltraGrip2 matte grey or matte black color (due to its...
Pole Dance pole, cut to measure for ceilings up to 240 cm, for static and spinning use with QuickSpin System, 45 mm of diameter, GeckoGrip coating available in white or black color, for pressure or...
Pole Dance pole, cut to measure for ceilings from 420 cm to 500 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, GeckoGrip coating available in white or black...
Pole Dance pole, cut to measure for ceilings from 420 cm to 500 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, stainless steel pole, ONLY for screws installation....
Pole Dance pole, cut to measure for ceilings from 320 cm to 420 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, GeckoGrip coating available in white or black...
Pole Dance pole, cut to measure for ceilings up to 240 cm, for static and spinning use with QuickSpin System, 40 mm of diameter, GeckoGrip coating available in white or black color, for pressure or...
Pole Dance pole, cut to measure for ceilings from 320 cm to 420 cm maximum, for static and spinning use with QuickSpin System, 45 mm of diameter, 100% certified stainless steel pole, for pressure or screws installation. The pole is designed to adapt to premises with an allowance of -1/+ 4 cm with respect to the height indicated. Make sure you have detected the measure at the point where the pole will be placed. Plate diameter 11 cm
For pressure installation we recommend adding the Safety Plate for the 11 cm plate.
en 
